1. Parameters
Product Modell
WLX-070R-AP20
-
;fRQUECY 1.0 GHz
:512mb dDR3
Fash flash:
-
: 7 zoll >
:-800 × 480●
widetemperatur-Typ
--64k-Farben oder 260k-Farben LBerbleLbacklight:lifetime25000 StundenTouch-Bildschirm4wire Widerstand Touchscreen()hardware-Schnittstelle● -
4-Kanal isoliert 3wire RS 232serial Port(COM1COM2
COM3 2 channel-
com2
multiplex RS 485 busInterface. 1-Kanal isoliertCAN-Bus. (
ptional //
1 channel built
in
wifi-Modul. ~
\1-Kanal-USBDevice-Schnittstelle
Support üblich Device wie Maus
~etc.
1 kanal 100m Ethernet-Schnittstelle. -~1 channel sd mmc Slot
-M c~
Support SD
MMC-Karte. ~
1-Kanal 3,5mm
AUDIO-Ausgangsschnittstelle.
● \\ \\ \
1-Kanal DC12V 24V,industrialindustrie-Lösung
Higher-Zuverlässigkeit. attententionwenner ist angeschlossen,Das GND-Draht der beiden Geräte muss angeschlossen sein, um das Brennen des seriellen Chips zu vermeiden und die Kommunikation zu beeinträchtigen .
nip65
( )Power: dc 12-24 V
600mA
working Temperatur :-
10
60 ℃ ●storage Temperatur++2080 ℃
working Feuchte: 10-90% rh
● shell struktur///:Plastik
panel größe
: ![1627379700.png 1png.png]()
206 × 142
(
m
Trepanning Größe
: 196
× 13
2 - (-
mm
) -application-Bereich -
- -
industrielle Steuerung
, - -Detection Vorrichtung
, nstruments und Meter-
-medische Geräte und Instrumente
intelligent Terminalsembedded hoheend Anwendung.
● Support CAN-Bus-Netzwerk-Bereitstellung.-
SoftwareSupport -
- down-Schutzfunktion.
●- QT Creator~--(
QT C- )
development Einfache zur Verwendung andere Software flexibel. -s y Ändern Sie den Benutzer des BenutzersDefined. / ● Degree
:
-90180 Interface Definition + -
![1627379732.png 5.png]()
com3![1627379762.png 6.png]()
\\n232 \\n \\n \\n \\n5. \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n6 \\n \\n \\n6. \\n \\n \\n6. \\n \\n \\n \\n \\n \\n \\n \\n \\n7 \\n \\n \\n \\n \\n \\n7 \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n232 \\n \\n \\n8. \\n \\n \\n \\n \\n \\n \\n \\n9. \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n10. \\n \\n \\n \\n \\nND \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n12. \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n2.1 RS \\ N232 \\nInterface \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\nSupport Die höchste \\nlevel-Baudrate 115200bps. Die entsprechende Schnittstelle \\ Nin Linux \\nSystem ist com1 \\n com4. Speziell COM1 und COM2 haben 2 Ausgangstyp als RS \\ N232 und RS \\ N485. \\ N \\n \\n \\n \\n2.2 RS \\ N485 \\ NInterface \\n \\n \\n \\n \\nDie entsprechende Port \\ Nin Linux \\ NSYSTEM ist com1 \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n232 \\n \\n \\n (\\n \\n \\n \\ncom1 \\ncom2 \\n \\n \\n), \\n \\n \\n \\nbut unterschiedlicher Ausgabetyp. \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n dterminal Resistenz innen. \\n \\n \\n \\n \\n2.3 CAN-Bus \\ NInterface \\n \\n \\n \\n \\n \\nTh Die Funktion von CAN \\ NBUS-Schnittstelle ist optional. \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n) \\n \\n \\n \\ N-terminalen Widerstand \\n \\ Nbetween \\n \\n \\n \\n \\ Ncan \\n \\n \\n \\n \\n \\n \\n \\nand \\n \\n \\n \\n \\n \\ N \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\nas in der Abbildung \\n gezeigt \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\ Neue Größe \\n \\n \\n: \\n \\n \\n206 × 142 \\n \\n \\n \\n (\\n \\n \\nmm \\n \\n \\n) \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\nTrepanning Größe \\n \\n \\n: \\n \\n \\n195.6 × 131.6 \\n \\n \\n (\\n \\n \\nmm \\n \\n \\n \\n) \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n \\n